APSC Assistant Engineer Syllabus 2022 – Download Exam Pattern, Syllabus Here

@careers99

APSC Assistant Engineer Syllabus 2022 – Download Exam Pattern, Syllabus Here: Candidates Are you preparing for APSC Assistant Engineer Syllabus 2022 Then this article is for You……….! Here The APSC Assistant Engineer Syllabus 2022 And Exam Pattern are available in detail. So the Candidates, who had applied for Assam Public Service Commission Jobs 2022 in the Departments of PHE, Public Works, and Searching Online for APSC Assistant Engineer Syllabus 2022, will get complete information here.

The APSC had recently announced the Syllabus. So the Applicants who applied for APSC Assistant Engineer Syllabus Exam must check this article. The Assam Public Service Commission Exam is quite tough to be Qualified and there will be huge competition for the Examination. SO the Contenders should practice Hard. So, to help those candidates we are here with the Updated APSC Assistant Engineer Syllabus and Exam Structure.

Assistant Engineer posts has released for the Disciplines of Civil, Electrical, Mechanical, Chemical Engineering. Assam Public Service Commission will recruit the candidates based on their performance in the online test. Shortlisted candidates in the online test are eligible to appear for the certificates verification procedure.

About Assam Public Service Commission:

The Assam Public Service Commission came into existence on 1st April, 1937 in accordance with the provision of the Govt. of India Act, 1935 with Mr James Hezelett, a retired ICS officer from London, as its first Chairman. Till framing a new regulation in 1951, five more officers mostly retired ICS officer, held the office of the Chairman for different period after Mr James Hezelett.

On India becoming Republic, the regulations of the Commission were framed by the Governor of Assam in exercise of the powers conferred by Article 318 of the Constitution of India and the same came into force w.e.f. 1st September 1951. Also in the same year the Assam Public Service Commission (Limitation of Functions) Regulation was promulgated in exercise of the powers conferred by the provision of clause II of Article 320 of the Constitution.

APSC Recruitment 2022 Notification

APSC Assistant Engineer Exam Syllabus & Exam Pattern 2022

Organization Name Assam Public Service Commission
Post Name Assistant Engineer
Category Syllabus
Name of the Department Public Health Engineering, Public Works Department
Selection Process Written Examination, Document Verification
Job Location Assam
Official Site www.apsc.nic.in

Check APSC Assistant Engineer Syllabus & Exam Pattern 2022 Here

The APSC Assistant Engineer Syllabus contains the complete description of the topics from which questions are given in the exam paper. And the exam pattern contains the marks and duration given for each topic. So before going to an exam, the candidates should be fully prepared. By reading the APSC Assistant Engineer syllabus and Exam Pattern along with previous papers you will get a clear idea about the examination. And it is also very useful for in time managing in the exam, from that you can attempt the complete questions given in the question paper. Automatically the exam score and performance will also be increased, so don’t neglect and start working on this recruitment.

  • Written Examination (Objective Type) 
  • Document Verification

Download APSC Assistant Engineer Syllabus 2022 PDF @ apsc.nic.in

Here we have uploaded the Syllabus and Detailed Exam Pattern to help the Aspirants in their Exam Preparation. So all the Applicants are advised to read this article completely and Download the APSC Assistant Engineer Syllabus and Exam Pattern for the Below Section for free of cost.

Examination Syllabus

APSC Assistant Engineer Syllabus – Civil

Syllabus for screening test for Recruitment to the post of Assistant Engineer (Civil) is as follows.

The Educational Qualification is Degree Standard.

General Studies: (Marks: 100, Duration: 2 hours)

  • Current Events of National & International importance.
  • History of India & History of Assam.
  • World Geography including lndia & Assam.
  • Indian Economy, Indian National Movement
  • Mental Ability
  • Role and Impact of Science and Technology in India.
  • Indian Polity, Political System in lndia.
  • Indian Culture

Civil Engineering:

Statics:

Statics: Co Planer and multi planer system, free body diagrams, centroid second moment of plane figure force and funicular polygons, principle of vifiual work suspension systems and centenary.

Dynamics: Units and Dimensions, Gravitational and absolute system, MKS & Sl. Unit

Kinematics: Rectilinear and Curvilinear motion, Relative motion, lnstantaneous centre

Kinetics: Mass moment of inertia, simple harmonic motion, tnomentum and impulse equations of motion of rigid body rotating about a fixed axis.

Strength of the materials: Homogenous and isotropic media, stress and strain elastic constants, tension and compression in one direction riveted and welded joints.

Compound Stresses: Principal stresses and principal strains, sirnple theories of failure. Bending moments and shear forced diagrams. Theory of bending, shear stresses distribution in cross section of beams. Deflection of beams.

Analysis of larr-rinated beams and non-prismatic structures. Theories of columns, ,iddle-third and rniddle-fourth rures. Three pinned arch analysis olsirnple frames. Torsion of shafts co-bined bending direct and torisonal stresses in shafts. Strain energy in erastic deformation. impact fatigue and creep.

Soil Mechanics:

Origin of soils, classification void ratio, moisture content permeability, conrpaction.
Seepage: construction of flow nets, Determination of shear strength parameters for different drainage and stress conditions- Tri-axial, unconfined and direct shear tests.
Earth pressure theories- Rankine’s and coulomb-,s analytical and graphical methods, stability of slopes.
Soil consolidation – Terzaghi,s theory for one dimensional consolidation, rate of settrernent and ultimate settrement, effective stress pressure distribution in soils, soil stabilization. Foundations _ Bearing capacity of footings, piles, Wells, Sheets piles.

Fluid Mechanics:

Fluid Statics -pressure at a points force on plane and curved surface, buoyancy stability of floating and submerged bodies, dynamics of fluid flow, Laminar and turbulent flow, equation of continuity energy and momentum equation, Bernoulli,s theorem,cavitations, Velocity, potential and steam Functions, rotational, irrotational flow vertices. Flow net, Ftuid flow measurement. Dimensional analysis: Units and dimensions – non-dimensional numbers, Buck-inggham,s pi-theore,, principles of similitude andl application.

Viscous flow: Flow between static plate and circular tubes, boundary layer concepts: drag and lift.
Incompressible flow through pipe: Laminar and turbulent flow critical velocity, Friction rosses, ross due to sudden enrargernent and contraction energy grade Iines.

Open Channel flow – Uniform and non_uniform flows, specific energy and critical depth, gradually varied flow surface profiles, standing wave flume, surges and waves.

Surveying:

General principles, sign convention surveying instruments and their adjustrnent, recording of survey observations, plotting of maps and sections, errors and their adjustments. Measurement of distances. directions and heights, correction to measure length and barring, correction for Iocal attractions, measurement of horizontal and verlical angles, leveling operations, refraction and curvature corrections, Chain and compass survey, theodolite and techeometric traversing, traverse computation; plane table survey, solution of two and three points problems, contour surveying, setting out direction and grades & type of curves, setting our of curves and excavation lines for building foundations.

APSC Assistant Engineer Syllabus – Electrical

Syllabus for screening test for Recruitment to the post of Assistant Engineer (Electrical) is as follows.

The Educational Qualification is Degree Standard.

General Studies: (Marks: 100, Duration: 2 hours)

  • Current Events of National & International importance.
  • History of India & History of Assam.
  • World Geography including lndia & Assam.
  • Indian Economy, Indian National Movement
  • Mental Ability
  • Role and Impact of Science and Technology in India.
  • Indian Polity, Political System in lndia.
  • Indian Culture

Electrical Engineering: (Marks: 100, Duration: 2 hours)

Primary and Secondary cell, Dry-accumulators, Solar Cells, Steady state analysis of D.C and A.C Network, Network Theorems, Network functions, Laplace techniques, transient response, frequency response, three-phase network, inductively couple circuits. Mathematical modeling of dynamic linear systems, transfer functions, block diagrams, stability of control systems.

Electrostatic and magnetostatic field analysis, Maxwell’s equations, Wave equations and electromagnetic waves.

Basic methods of measurements, standard error analysis, indicating instruments, cathoderay oscilloscope, measurement of voltage, current, power resistance, inductance, capacitance, frequency, time and flux, electronic motors

Vacuum based and Semiconductor devices and analysis of electronic circuits, single and multistage audio and radio, small signal and large signal amplifiers, oscillators and feedback amplifiers, waveshaping circuits and time based generators, multivibrators and digital circuits, rnodulation and demodulation circuits. Transmission line at audio, radio and U.H frequencies, Wire and Radio Communication.

Generation of e.m.f and torque in rotation machine, motor and generator characteristics os d.c. synchronous and induction machines, equivalent circuits, commutation starters, phaser diagram, losses, regulation, power transformers.

Modeling of transmission lines, steady state and transient stability, surge phenomena and insulation coordination, protective devices and schemes for power system equipment. Conversion of a.c to d.c and d.c to a.c, controlled and uncontrolled power, speed control techniques for drives.

APSC Assistant Engineer Syllabus – Mechanical

Syllabus for screening test for Recruitment to the post of Assistant Engineer (Mechanical) is as follows.

The Educational Qualification is Degree Standard.

General Studies: (Marks: 100, Duration: 2 hours)

  • Current Events of National & International importance.
  • History of India & History of Assam.
  • World Geography including lndia & Assam.
  • Indian Economy, Indian National Movement
  • Mental Ability
  • Role and Impact of Science and Technology in India.
  • Indian Polity, Political System in lndia.
  • Indian Culture

Mechanical Engineering: (Marks: 100, Duration: 2 hours)

Statics:

Simple application of equilibrium equations

Dynamics:

Simple applications of equations of motion, sinrple harmonic motion, work energy, power

Theory of Machines:

Simple examples of links and mechanism, Classification of gears, standard gear tooth profiles wheel types of governors, static(s) and dynamic balancing, Simple examples of vibration of bars, Whirling of shafts.

Mechanics of Solids:

Stress strain, Hook’s Law, elastic modulii, bending moments and shearing fbrce diagrams for beams, Simple bending and torsion of beams, Spring, Thinwalled cylinders, Mechanical properties and material testing.

Manufacturing Science:

Mechanics of metal cutting tool life economics of machining cutting, tool materials. Basic machining processes, types of machine tools, transfer lines, Shearing drawing spinning, rolling forging extrusion, Different types of casting and welding methods.

Production Management:

Method and time study, motion, economy and work space design, operation and flow process charts, Product design and constant selection of manufacturing process, Break even analysis, Site Selectiorr of equipment for job, Shop and Mass production, Duling dispatching, Routing.

Thermodynamics:

Heat, work and temperature, First and Second Laws of thermodynamics, Carnot Rankine, Otto and DieselCycles.

Fluid Mechanics:

Hydrostatics, Continuity equation, Bernoulli’s theorem, Flow through pipes, Discharge measurement, Laminar and Turbulent flow, Concept of boundary layer.

Heat Transfer:

One dimensional steady, state conduction through walls and cylinders, Fins, Concepts of thermal boundary layer, Heat transfer coefficient, Combined heat transfer, Coefficient, Heat ex-exchangers.

Energy Conversion:

Compression and spark ignition engineers, Compressors, Fans and Blowers, Hydraulic pumps and turbines, Thermal turbo machines, Boilers, Flow of steam through nozzles, Layout of power plants

Environmental Control:

Refrigeration cycles, refrigeration equipment, its operation and maintenance, Important refrigerants, Psychometrics comfoft, Cooling and dehumidification.

APSC Assistant Engineer Syllabus – Chemical

Syllabus for screening test for Recruitment to the post of Assistant Engineer (Mechanical) is as follows.

The Educational Qualification is Degree Standard.

General Studies: (Marks: 100, Duration: 2 hours)

  • Current Events of National & International importance.
  • History of India & History of Assam.
  • World Geography including lndia & Assam.
  • Indian Economy, Indian National Movement
  • Mental Ability
  • Role and Impact of Science and Technology in India.
  • Indian Polity, Political System in lndia.
  • Indian Culture

Chemical Engineering: (Marks: 100, Duration: 2 hours)

Cement:

Types, portland cement and special types of cement

Processes and Process Variables:

Mass and volume, mole and molecular weight, choosing a basis, flow rate , chemical composition, density and specific gravity, concentration, pressure temperature

Properties and corrosion of material:

Electrical and magnetic properties of materials- Chemical, thermal and technological properties of materials – corrosion, theories of corrosion – controf ana prevlntion of corrosion

Metals:

Engineering materials – ferrous metals – Iron and steel, Iron- carbon equilibrium diagram. Non ferrous metals and alloys – Aluminium, copper, zinc, Lead, nickel and their alloys with special ieference to the application in chemical industries

Fluid Flow phenomenon:

Velocity field, laminar flow, velocity gradient and rate of shear, Eddie viscosity, viscosity and momentum flLi, shear stress field, Newtonian and non- Newtonian fluids, Binghham model, ostwald-de Waele model of non-Newtonian fluid, turbulent iow, Reynold’s experiments, flow in boundary rayer, laminar and turbulent flow in boundary layer, transition from laminar to turbulent flow – Reynold’s number, boundary layer separation and wake formation

Basic Equation of Fluid Flow:

Stream lines and stream tubes, average velocity, mass velocity, integral equation of flow * Euler’s equation of motion, momentum equation for one dimensional flow under steady state condition, the Bernoulli’s equation, its application to pumps, blowers, turbines etc

Sedimentation:

Gravitational sedimentation Fine suspensions – Coarse suspensions – Solids flux in batch sedimentation – The Kynch theory of sedimentation – thickner, Centrifugal separation – behavior of liquids in centrifuge basket fluid pressure – sedimentation in a centrifugal field – separation of two immiscible liquids – centrifugal equipment.

Filtration:

The theory of filtration – relation between thickness of cake and volume of filtrate-flow of liquid through the cloth-flow of filtrate through the cloth and cake combined, compressible filter cakes, Filtration practice-The filter medium- blocking filtration, effect of particle sedimentation on filtration-delayed cake filtration- preliminary treatment of slurries before filtration-washing of filter cake, Filtration equipment, Filtration in a centrifuge, Filtration calculations.

Mixing and Agitation:

Agitation of liquids – Purpose of agitation, agitation equipment-Impellers-Flow patterns in agitation vessels circulation rate- velocity gradients in agitated vessels-power correlations for specific impellers-effect of system geometry-calculation of power consumption

Click Here for APSC Assistant Engineer Syllabus – Civil

Click Here for APSC Assistant Engineer Syllabus -Chemical

Click Here for APSC Assistant Engineer Syllabus – Mechanical

Click Here for APSC Assistant Engineer Syllabus – Electrical

Click Here for Official Website of Assam Public Service Commission

Ap Fa1 Important Questions Papers 2022

FA1 10th IMP Question  Papers 2022 Fa1 9th IMP Question  Papers 2022 FA1 8th IMP  Question papers 2022
Fa1 10th Telugu Fa1 9th Telugu Fa1 8th Telugu
Fa1 10th Hindi Fa1 9th Hindi  Fa1 8th Hindi 
Fa1 10th English Fa1 9th English Fa1 8th English
Fa1 10th Maths FA1 9th Maths FA1 8th Maths
Fa1 10th Physics Fa1 9th Physics  Fa1 8th Physics 
Fa1 10th Biology Fa1 9th Biology  Fa1 8th Biology 
Fa1 10th Social Fa1 9th Social  Fa1 8th Social 

 

Rate this post

Leave a Comment